Cold air intake kit Abarth 500/595/695 (Silicone version)
SLP Cold Air Intake Kit with Velocity Stack for Abarth 500 / 595 / 695 T‑Jet
The SLP Cold Air Intake replaces the factory airbox with a high-quality black silicone intake hose, a velocity stack and an air filter tucked beneath the wiper cowl. The filter sits outside the engine bay and draws fresh outside air through the factory vents below the windscreen, in the same area as the cabin’s fresh-air intake. The silicone hose helps limit heat transfer from the engine bay to the incoming air.
In our dyno testing on a stock Abarth, the kit delivered more than 10 hp over the factory intake with the original ECU calibration. It can be fitted to a completely stock car with no ECU remap required. Power gains may vary depending on the vehicle and test conditions.
The kit also brings out the sound of the T‑Jet. You’ll hear the turbo spool and whistle more clearly from inside the cabin, especially under acceleration.
Designed as a direct replacement for the factory intake, the kit requires only minor modifications during installation. We’ve fitted and tested this design on many customer cars over the past decade without reported issues.
Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
SLP Cold Air Intake Kit with Velocity Stack for Abarth 500 / 595 / 695 T‑Jet
The SLP Cold Air Intake replaces the factory airbox and positions the filter beneath the wiper cowl, outside the engine bay. The filter draws cool outside air through the factory vents below the windscreen, in the same area as the cabin’s fresh-air intake. The high-quality black silicone hose helps limit heat transfer from the engine bay to the incoming air.
In our dyno testing on a stock Abarth, the kit delivered more than 10 hp over the factory intake with the original ECU calibration. It can be fitted to a completely stock car with no ECU remap required. The kit also brings out the sound of the T‑Jet, making the turbo spool and whistle more audible from inside the cabin, especially under acceleration. We’ve fitted and tested this design on many customer cars over the past decade.
What’s included
-
High-quality black silicone intake hose
-
High-quality hose clamps
-
PCV line
-
High-flow Pipercross air filter with water-repellent properties
-
mounting screws
Turbo compatibility
Suitable for the factory turbo and upgraded setups such as the Garrett 1446, TD04 and Garrett GBC.
Installation
Installation should be carried out by an experienced technician. A 70 mm opening must be cut in the plastic panel beneath the wipers for the intake hose to pass through. Two 10 mm mounting holes are also required to secure the assembly with the supplied screws.
Important maintenance
Regularly clear leaves and debris from the drainage channels beneath the windscreen and keep the drain openings clear. If the drains become blocked, rainwater can collect around the filter and enter the intake, potentially causing serious engine damage.
Important Installation and Maintenance Notes
Owner maintenance and risk of engine damage. The vehicle owner is responsible for keeping the area around the air filter free of standing water, leaves and other debris, and for keeping the drain channels beneath the windscreen clear. Check this area regularly, particularly after heavy rain or when leaves accumulate. To the extent permitted by applicable law, SLP Tuning & Service is not liable for engine damage caused by water or debris entering the intake as a result of improper installation or inadequate maintenance. Your statutory rights remain unaffected.
Windscreen and wiper cowl. Take particular care when removing and refitting the plastic wiper cowl. Keep sharp tools away from the windscreen and avoid levering against the glass, especially around its edges. Make sure the cowl is fully clipped into place and sits flush along the base of the windscreen so rainwater is directed into the factory drains and away from the filter. Follow the supplied installation instructions for refitting the cowl. If you need help, contact us at
Fitting newer Pipercross filters. The newer Pipercross filters with a rigid plastic backing require modification at two points. Depending on the fit, the additional plastic cover for the cabin air intake may also need trimming. Position the filter as low as the available clearance allows beneath the windscreen to reduce its exposure to rainwater, while keeping it clear of the drainage channels. Before returning the vehicle to service, check that the cowl is fully seated, the drains are clear and water is directed away from the filter.
Contact
User Account
Informations
Follow us on Social
